Award Winning ABB DistributorCall Us Toll-Free: (877) 268-3700 | sales@grossautomation.com
DA SERIES | DRIVE CONTACTORS| 60 AMPS | AC OPERATED
APPLICATION
DA drive contactors are specifically designed for use with solid state D.C. adjustable speed drive systems. In drive applications, the contactor is not required to make or break the load during normal operation. The N.C. contact is used for dynamic braking applications.COIL SELECTION
All catalog numbers include a 120V coil. To select other coil voltages, substitute the code from the Coil Voltage Selection Chart for the two digits after the last dash in the catalog number.
COIL VOLTAGE SELECTION CHART
| Hz | Cntr Type | Volts | |||||||||||||||
| 12 | 24 | 48 | 110 | 120 | 125 | 208 | 220 | 240 | 277 | 380 | 415 | 440 | 480 | 500 | 600 | ||
| 60 | A | 81 | 83 | 84 | 84 | 34 | 36 | 80 | 42 | 86 | 86 | 51 | 53 | 55 | |||
| 50 | A | 81 | 83 | 84 | 80 | 85 | 86 | 55 | |||||||||
NOTE: DC coils are available for DA75 contactors only.
STANDARD PART NUMBERS | (2 & 3 Pole - 500 Volt N.O. ratings / 160 volt N.C. dynamic braking)
| Thermal Amp Rating | Maximum Amp Rating N.C. Contact |
Auxiliary Contacts Included | 2 pole (2 N.O.) | 3 pole (2 N.O. & 1 N.C.) | ||
| Make 300 VDC |
Break 160 VDC |
N.O. | N.C. | Catalog Number | Catalog Number | |
| 60 | 90 | 55 | 2 1 |
1 1 |
- DA75-20-11-84 |
DA75-21-21-84 - |
STANDARD PART NUMBERS | (3 Pole - 500 Volt N.O. ratings / 300 volt N.C. dynamic braking)
| Thermal Amp Rating | Maximum Amp Rating N.C. Contact |
Auxiliary Contacts Included | 3 pole (2 N.O. & 1 N.C.) | ||
| Make 500 VDC |
Break 300 VDC |
N.O. | N.C. | Catalog Number | |
| 60 | 90 | 55 | 1 | 1 | DA75-21A-11-84 |
AUXILIARY CONTACT BLOCKS
| Contactor Number | # of auxiliary contacts that may be added to DA contactors |
| DA75-21-21-84 | (1-2) CA5 & (1) CAL5 Aux |
| DA75-20-11-84 | (1) DB Adder deck & (2) CA5 & (1) CAL5 Aux |
AUXILIARY CONTACT BLOCK ADDERS
